V6 Baserunner_Z9 Controller, Stand Alone Model

Baserunner_Z9 Stand Alone Field Oriented Motor Controller. Special Stand Alone Model with All Cables Exiting the Front, Including 15cm Long Battery Cable. Z910 Motor Plug. 55A Peak Phase Currents (~30A Continuous), for 24-52V Batteries (60V Max Input).

Page d'informations complètes sur le produit

 

Depuis €234.00

À €272.00

En stock

UGS
BUNDLE-Baserunner_Z9_SA
Customize V6 Baserunner_Z9 Controller, Stand Alone Model
V6 Baserunner_Z9 Autonome

* Champs obligatoires

Votre personnalisation
Phasernuner_MT V3 Vue latérale
V6 Baserunner_Z9 Controller, Stand Alone Model

En stock

€234.00

Résumé

    The Baserunner_Z9 is a compact field-oriented motor controller originally designed to fit inside battery downtubes. This version is configured for installations that aren't using a downtube battery pack. The battery cable exits the rear of the controller along with all the other cables and the enclosure casting is a bit wider than a regular Baserunner Z9 as a result. This device uses the WP8 CA plug and can support speed signals, temperature signals, or combined temp+speed signals on the white wire of the Z910 connector.

     

    •           Connecteur HiGo à 8 broches pour la commande CA3-WP (Pour convertir le WP8 en un CA-DP classique, vous devez acheter un adaptateur.)
    •           Connecteur secteur Cusmade à 9 broches pour faisceaux de câbles vers des écrans tiers, utilisable également pour alimenter un feu arrière 
    •           Connecteur HiGo MiniB à 6 broches pour capteur PAS ou de couple direct lors de l'utilisation d'écrans tiers

    It is compatible with up to 14s (58V) battery packs and is terminated with a Z910 waterproof HiGo motor plug. Cables and connectors are otherwise identical to the Phaserunner, and remote on/off switch wires are present under the throttle heatshrink. Requires computer setup to mate and configure with a given motor, and this requires the USB->TTL communications cable if you don't already have that. Requires CA3-WP and MFSwitch or separately wired on/off switch to turn on. Full Baserunner Information Page.

    A computer setup is required to configure this controller to a given motor, and this requires the USB->TTL communications cable if you don't already have one. Users without an on-off switch on their battery should expect to wire in a separate switch on their own. Full Baserunner Information Page.

    V6 Baserunner_Z9 Autonome
    Fabricant
    Sourire
    Dimensions (L x l x H, mm)
    98 x 60 x 15
    Poids réel (kg)
    0.28
    Tension de régénération maximale (V)
    60
    Ampères maximum de la batterie (A)
    30
    Ampères de phase maximum (A)
    55
    Autonomie de la batterie (V)
    20-60
    Connecteur(s)
    Anderson, HiGo 0812(WP8), TRRS, Z910, HiGo MiniB
    Plus d'informations